![]() We’ll use TeamViewer as an example here because it’s the best solution for remotely accessing a PC’s desktop or even the files on its hard drive in our opinion. Remote access programs like TeamViewer and Parallels Access now have Wake-on-LAN support built-in, so you can skip some of the more tedious setup process and wake your PC with the remote-access program you already use. RELATED: The Best Tools to Easily Perform Remote Tech Support The tool can then send a “magic packet” with the correct information and-if you’ve configured everything correctly-your PC will wake up. Port Number: Enter the number of the UDP port you forwarded to the broadcast address.Subnet Mask: You’ll also have to enter the appropriate subnet mask for the computer behind the router.IP Address or Domain Name: Enter your router’s IP address on the Internet or a dynamic DNS address like.MAC Address: Enter the MAC address of the network interface listening for the Wake-On-LAN packet.If your PC has the IP address 10.0.0.123, you’d enter 10.0.0.255 as the broadcast address. For example, if your PC has the IP address 192.168.1.123, you’d enter 192.168.1.255 as the broadcast address. To do this, you’ll need to forward the port to the “broadcast address,” which will broadcast the packet to all computers on a network. This is known as a “subnet directed broadcast.” The Wake-on-LAN packet must be forwarded to every device running behind your router, and a device will only wake up if the information in the WoL packet matches it. You’ll need to forward a UDP port to all IP addresses behind your router-you can’t just forward to a specific IP address. Many utilities use ports 7 or 9, but you can use any port you like for this. RELATED: How to Port Forward on Your Router If yours doesn’t, you’ll need to disable Fast Startup. Note: Wake-on-LAN may not work on some PCs using the Fast Startup mode in Windows 8 and 10. RELATED: The Pros and Cons of Windows 10's "Fast Startup" Mode Click the Advanced tab, locate “Wake on magic packet” in the list, and enable it. Open the Windows Device Manager, locate your network device in the list, right-click it, and select Properties. You may also have to enable this option from within Windows, whether there’s a WoL option in your BIOS or not. The computer may not support Wake-on-LAN or WoL may always be enabled and have no related options in the BIOS. If you don’t see this option in your BIOS or UEFI, check the computer or motherboard’s manual to see if it supports Wake-on-LAN. In your PC’s settings, ensure the Wake-On-LAN option is enabled. You’ll typically find this setting in a computer’s BIOS or UEFI settings. ![]() ![]() ![]() To make this work, you’ll first have to set up Wake-On-LAN normally. How to Wake PC Remotely from Sleep Mode?.RELATED: What Is Wake-on-LAN, and How Do I Enable It?.Well, there are so many benefits of switching to wake up option.Your PC gets enough time to reboot when sleep mode is active.Power saving, useful for the environment.Not require any physical presence of anyone all the time.TIP: Generally, it has been noticed that keeping your PC in sleep mode if you have a little span of rest reboot your PC and improves startup speed and normal running speed of your system. RECOMMENDED: Battery dying fast? - Quick guide to improve performance Suppose you have done your work for 4 hours regular and you need a 1-hour break then it is recommended to make your PC to Sleep mode except doing Shut Down. How to Wake PC Remotely from Sleep Mode? 1.Using WoL (Wake on LAN) Option Now let us check what are different ways to Turn ON your PC remotely. This option is bit easy to wake your PC remotely. If you are unfamiliar with the term WoL then firstly know what it then proceeds further. WoL (Wake on LAN) is a protocol medium or follows a particular standard that wakes your PC using Network message. All you need is to set a programme on another device connected to the same Local Area Network. If you are unable to connect the devices with the same LAN then you need to check out a different method. From the list displayed on the left pane, tap on Change Adapter Options.Type Network proxy settings in the search bar space near the Start menu icon.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |